Over 90 years of experience in the compression of all types and mixtures of gases.
SIAD Macchine Impianti can supply oil-free or lubricated, low to moderate speed reciprocating compressors for process gas and air, with water-or air-cooled cylinders in compliance to Clients’ requirements and to applicable industry standard, including (if the case): API618, ISO 13631, EIGA.
All compressors are complete with electrical motors, engines or turbines, air or water heat exchangers, instrumentation, electrical panels, filters and are assembled on skids or directly mounted on foundations. They are therefore fully ready to be commissioned.
| Range of Reciprocating Compressors for Process Gases and Air |
| Stages | 1/2/3/4/5/6 |
| Maximum suction Volume | 90 000 m3/h |
| Maximum power | 8 700 kW |
| Maximum delivery pressure | 550 bar |
| Types of cylinder configuration | Vertical, V, W, Horizontal |
| Shaft speed | from 300 to 1 500 rpm |
SIAD Macchine Impianti compressors can manage all types of gases: inert, oxidising, toxic, explosive and corrosive.
| Speciality | Gas |
| Oxidising | Nitrous oxide, Oxygen |
| Corrosives | Carbon Dioxide |
| Explosives | Acetylene, Butane, Ethane, Ethylene,
Hydrocarbons, Hydrogen, Methane,
Propylene |
| Inerts | Air, Argon, Nitrogen, Helium, Freon |
| Toxics | Ammonia, Carbon monoxide |
Download Catalogue
SIAD Macchine Impianti can supply an integrated compression package design according to the main construction and safety International Standard. Compressors are designed based on customer needs.
| Pressure Vessel engineering
and Construction Codes:
AD 2000
ASME VIII DIV. 1 / ASME B 31.3
BS 5500
CODAP
ISPESL
TEMA
EN 13445
EN 13458
GB License (Russia): CR TU standard package (Russia)
CR TU process package (Russia)
Code stamp (in-house):
CE
| Code stamp (sub-contracted):
“U” ASME
SELO
European Directives:
CE-PED
CE-Low Voltage
CE-Machinery
CE-Electromagnetic compatibility
CE-ATEX Engineering Standards:
ANSI
API
ASTM
AWS
BS
CEI
DIN
EN
IEC
ISO / ISA
NACE
NEMA
UNI |
Thanks to its engineering services, SIAD Macchine Impianti is able to produce reciprocating compressors that integrate perfectly in the existing production lines:
- Pulsation, acoustical, torsional, bending analysis.
- Finite elements structural verification.
- Fluid-dynamic verification Fatigue calculation
- Measurement and verification of vibration, ultrasonic, thermography, radiography
- Chemical, physical and metal particles oil analysis.
Software for Mechanical calculation
3D modelling, static elastic Fem analysis, infinite life fatigue analysis
Elastic bodies motion of the complete frame, static elasto-plastic Fem analysis
Multiaxial fatigue analysis with the algorithm of Dang Van or Brown – Miller – Morrow
Computational Fluid Dynamics (CFD) Software
The gas paths are studied by the computer with most advanced CFD software with the aim to reach at the same time a small clearance volume, for a greater volumetric efficiency, and large and well profiled passages for low pressure losses.
Thanks to the experience and expertise of its staff, SIAD Macchine Impianti offers a complete range of compressors and advanced equipment technologies which attain even the most ambitious goals.
The mail industries served are:
- Cement
- Chemical
- Cold gases transport
- Electronics
- Energy and Power Generation
- Food & Beverage
- Glass
- Industrial Gases
- Metal Production
- Mining
- Oil & Gas Exploration and Production
- Petrochemical
- Pulp and paper
- Refinery
- Renewable energy
- Water Treatment and Transmission
SIAD Macchine Impianti offers a wide range of solutions and can satisfy your requirements with products and services that respond to your specific needs.If you would like to receive an offer for Reciprocating Compressors for Process Gas and Air, send an email to: siadmi_compr@siad.eu
